您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 1728-1979 漆膜,腻子膜干燥时间测定法

时间:2024-05-17 13:26:47 来源: 标准资料网 作者:标准资料网 阅读:8334
下载地址: 点击此处下载
基本信息
标准名称:漆膜,腻子膜干燥时间测定法
英文名称:Methods of test for drying time of coatings of paints and putties
中标分类: 化工 >> 涂料、颜料、染料 >> 涂料基础标准与通用方法
ICS分类:
发布部门:国家标准总局
发布日期:1979-09-15
实施日期:1980-01-01
首发日期:1979-09-15
作废日期:1900-01-01
主管部门:中国石油和化学工业协会
提出单位:中华人民共和国化学工业部
归口单位:全国涂料和颜料标准化技术委员会
起草单位:甘肃油漆厂涂料研究所
出版社:中国标准出版社
出版日期:1980-01-01
页数:2页
适用范围

本标准适用于漆膜、腻子膜干燥时间的测定。在规定的干燥条件下,表层成膜的时间为表干时间;全部形成固体涂膜时间为实际干燥时间。以小时或分表示。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 化工 涂料 颜料 染料 涂料基础标准与通用方法
【英文标准名称】:Paperandboardintendedtocomeintocontactwithfoodstuffs.Determinationofcadmium,leadandchromiuminanaqueousextract
【原文标准名称】:与食品接触的纸和纸板.水提物的镉、铅和铬含量测定
【标准号】:DDENV12498-1998
【标准状态】:作废
【国别】:英国
【发布日期】:1998-04-15
【实施或试行日期】:1998-04-15
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:纸;铬;纸板;接触食品的材料;铅;水解萃取法;食品;镉;含量测定;原子吸收分光光度测定法;化学分析和试验;试样制备
【英文主题词】:
【摘要】:
【中国标准分类号】:Y30
【国际标准分类号】:67_250;85_060
【页数】:10P;A4
【正文语种】:英语


Product Code:SAE J516
Title:Hydraulic Hose Fittings
Issuing Committee:Hydraulic Hose And Hose Fittings Committee
Scope:This SAE Standard provides general and dimensional specifications for the most common hose fittings used in conjunction with hydraulic hoses specified in SAE J517 and utilized in hydraulic systems on mobile and stationary equipment.The general specifications contained in Sections 1 through 15 are applicable to all hydraulic hose fittings and supplement the detailed specifications for the 100R-series fittings contained in the later sections of this document.This document shall be utilized as a procurement document only to the extent agreed upon by the manufacturer and user.Refer to SAE J517 for specifications of hose and information on hose assemblies. SAE J1273 contains information on application factors affecting hose fittings, hose, and hose assemblies.THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J516 FITTINGS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES.The following are hose fitting types contained in this document:a. Male dryseal pipe thread type hose fittings shall be as shown in Figures 1A to 1C for the respective styles, and in Tables 1A to 1M for the applicable hoses and sizes.b. Male straight thread O-ring boss type hose fittings shall be as shown in Figures 2A and 2B for the respective styles, and in Tables 2A to 2H for the applicable hoses and sizes.c. Male 37-degree flared type hose fittings shall be as shown in Figures 3A to 3C for the respective styles, and in Tables 3A to 3L for the applicable hoses and sizes.d. Female 37-degree flared type hose fittings shall be as shown in Figures 4A to 7B for the respective styles and shapes, and in Tables 4A to 4M for the applicable hoses and sizes.e. Male 45-degree flared type hose fittings shall be as shown in Figures 8A and 8B for the respective styles, and in Tables 5A to 5E for the applicable hoses and sizes.f. Female 45-degree flared type hose fittings shall be as shown in Figures 9A to 12B for the respective styles and shapes, and in Tables 6A to 6E for the applicable hoses and sizes.g. Male flareless type hose fittings shall be as shown in Figures 13A and 13B for the respective styles, and in Tables 7A and 7B for the applicable hoses and sizes.h. Female flareless type hose fittings shall be as shown in Figures 14A to 14C for the respective styles, and in Tables 8A and 8B for the applicable hoses and sizes.i. 4-bolt split flange type hose fittings shall be as shown in Figures 15A to 21C for the respective styles and shapes, and in Tables 9A to 9I2 for the applicable hoses and sizes.j. Female O-ring face seal hose fittings shall be as shown in Figures 22A to 25B for the respective styles, and Tables 10A to 10L for the applicable hoses and sizes.It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this document insofar as they may apply. The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail.